Home > Bike Types > Fatbike

Corratec Enduro 175 mellows out with frequency-damped suspension, plus more new road, MTB

Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More


In 2014, Corratec developed their 10Hz damper to work in concert with their InsideLink suspension platform. The idea behind it is simple – provide frictionless small bump absorption to reduce high frequency vibrations that a sealed, damped shock absorber simply can’t keep up with. Because the seals on air shocks need to be tight to keep the high pressures in, there’s inherent stiction that must be overcome before it can start working. The negative springs help, but even those can’t get the shock to react to the smallest of bumps. Add in any friction from linkages or shock binding and the benefits of the small TPU upper shock mount become clearer.

Essentially, it’s a small MDU elastomer that isolates the upper shock mount from the frame and adds up to 15mm of travel to the suspension. It’s shown here on their 100mm travel InsideLink Carbon race full suspension bike, which was introduced last year. Now that the tech has been trail proven, it’s been added to the all-new Enduro 175 bike, too…


Made for enduro racing, the InsideLink 10Hz 175 (yes, that appears to be the actual model name) gets a 160mm suspension front and rear, but with the 10Hz system adding 15mm more for 175mm total in the back. This one’s an alloy frame that comes in two spec levels, both with Rockshox suspension and X01 or XT drivetrain options.

Despite the long travel, they say it climbs like a trail bike thanks to the InsideLink platform’s 200% anti-squat. It’s a VPP (virtual pivot point) design that puts the effective pivot about 4” behind the bottom bracket, between the chain and chainstay. They say that makes it impervious to even the most aggressive pedaling efforts without affecting its ability to handle the terrain. That design means their bikes don’t need any platform or lockout in the suspension, letting it stay open to be as responsive as possible.


The 100mm bike gets some updates for 2016, mainly in the form of new spec including Shimano 11-speed groups, with SideSwing and Di2 compatibility built into the frame.


They use titanium axles on the linkage with heavy duty bearings. Because they’re not rotating much, they don’t need to be the same smooth spinning, lighter bearings found in wheels, so they prioritize stiffness and durability in these spots.


The rear triangle is a single piece with a clever mud fender built into the design. The driveside chainstay is dropped lower to prevent chain slap.


The MDU elastomer supposedly also helps by extending (or complementing) the tire’s ability to mold to the terrain, keeping it in better contact with the ground.


Different density elastomers are available for different rider weights. The system is also used on their carbon 120mm and 140mm trail/all-mountain bikes, too.


The Revolution 29er gets reworked with a less drastic bend in the headtube-to-downtube junction. The frame is made using a firm EPS inner mold and monocoque construction to create a stiff, light frame. Two frame levels are offered, SL and standard.


Di2 and SideSwing ready, and the top model takes advantage of it with a €9,499 XTR Di2 build.


The chainstays and BB are formed as one piece running all the way through the bend in the downtube.


The new CCT Evo Road bike is for racing only and has a very aggressive stack to reach ratio. It has a somewhat aero frame and uses NACA profiles 0083 for the fork legs. Those legs are designed to be massively stiff side to side by allow a bit of fore/aft flex to soak up some of the road buzz. Claimed frame weight is 860g and 290g for the fork.

It uses Shimano’s direct-mount brakes with the rear underneath the chainstays.



One nice little touch Corratec includes are these rubberized bar tape covers. Rather than tuck the tape into the end of the bar and plugging it or just wrapping it with tape, these roll onto the ends of the bars and cover the end of the tape to prevent it from unraveling.


Yes, e-MTB is huge in Europe and growing. Every brand has one. Corratec’s uses their 10Hz damping system with 140mm front and rear travel.


There was also this bike on hand with absolutely no explanation. The fat bike was built with a V1 Pro electric motor kit that appears to be from ADEN Sports. The V1 Pro isn’t listed on the company’s website, but a very similar kit called the Powerkit Pro lists the conversion at up to 7,000w and a max speed up to 70kph! Pretty sure this wouldn’t be legal here in the states…



Notify of

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Newest Most Voted
Inline Feedbacks
View all comments
Eric E. Strava
Eric E. Strava
8 years ago

200% anti-squat is quite literally too much of a good thing. Like 100% too much.

8 years ago

Way to mount that battery at the ‘worst’ location on the frame, which is silly considering they have a ton of room inside the front triangle.

Trail Dog
Trail Dog
8 years ago

Yeah, can you say pedal kickback? Even 120% gets out of hand in low speed rock gardens.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.